10. Select General data and check that GREEN SEA & SLAMMING is 1 or 2 and at last
speed trial speed is legal.
11. Select Prime mover data and check that Specific gravity of F.O. is around 950, Heating
value is around 41240 and shaft generator loading is around 500.
12. Press Esc to get back in Main menu
13. Select OPTIMIZE Voyage
14. Check that optimization results are OK.
15. Press Esc until you get back to ECDIS program.
16. Check with backup and WP Summary report, that route has all its waypoints and the data is
OK.
242 • • • • Route planning
+------------------++----------------------------------------------------------+
¦ General Data
¦¦
Move: ??
+------------------++----------------------------------------------------------+
+------------------------------------------------------------------------------+
¦
¦
LOADING CONDITION
¦
¦
¦
¦
¦
¦
SEA WATER TEMPERATURE
¦
¦
GREEN SEA & SLAMMING
¦
¦
SHIPs PERFORMANCE
¦
¦
-at last speed trial
¦
¦
¦
+------------------------------------------------------------------------------+
+------------------++----------------------------------------------------------+
¦ Prime Mover Data ¦¦
Move: ??
+------------------++----------------------------------------------------------+
+-----------------------------------------------------------------+
¦
¦
¦
¦
Specific gravity of F.O.
¦
¦
¦
Heating value
¦
¦
¦
¦
¦
Expected average of
¦
¦
shaft generator loading
¦
¦
+-----------------------------------------------------------------+
Mean Draught
Average for Voyage
1: Respected 2: Ignore
Speed ratio
Speed
Draught at speed trial
950 (kg/ m^3) at 15 °C
of F.O.
41000 (kJ/kg)
0 (kW)
Exit: ESC ¦
¦
8.00
m
¦
¦
¦
¦
¦
¦
12.0
°C
¦
¦
2
¦
¦
1.00
¦
¦
17.0
knots
¦
¦
8.00
m
¦
¦
Exit: ESC ¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦