Table of Contents
Advertisement
A complete example how to order a single Chart from a RENC by
Telecomm
If you want to order Permit or Chart and Updates for a single Chart from a RENC.
1. Open Catalogue of S57 Charts, select
RENC to be displayed.
2. Move cursor over Chart border you are
interested in and press SELECT button of
Control Panel.
3. In Selected Chart field you can see the
Chart number, press Cell Status button.
4. In Cell Status window you can see selected
Chart edition and updates number in the
RENC. If you want order Permit for this
Chart, press RENC Telecomm button.
5. In RENC Telecomm Manager window
select Permit and mode of Permit
(Subscription or One-Off).
6. If you like to see how transaction is
progressing, press Show Order Queue
button.
7. To send your request press Order button.
8. When your request is sent to the RENC you
can monitor the transaction in RENC Order
Queue window (When the ECDIS is
sending and receiving information).
112 • • • • Vector Chart material
2.
1.
3.
4.
5.
6.
7.
8.
Advertisement
Table of Contents
