Table of Contents
Advertisement
Import:
You can import new waypoints from already existing routes into your current route.
Reverse:
Use this function to reverse sailing order of the whole route.
Add waypoints
To define a waypoint, you have following alternatives:
•
Move cursor to the desired location on the Electronic chart area and press Select button in
Control Panel.
•
Use Add button in Waypoints sheet.
To add a waypoint by Select button, proceed as follow:
1.
Open Waypoints sheet.
2.
Take cursor to the Electronic chart area to desired position and press Select button.
3.
Modify data of added waypoint. For more information to modify WPs data, see "Change
other waypoint data" on page 234.
To add a new waypoint by Add button, proceed as follow:
1.
Open Waypoints sheet.
2.
Press Add button in Waypoints sheet. This adds a new waypoint into the route. This is copy
of current waypoint.
3.
Modify position of waypoint. For more information to modify WP's position, see "Change
waypoint position" on page 233.
4.
Modify other data of waypoint. For more information to modify WP's other data, see "Change
other waypoint data" on page 234.
When you added a new waypoint, you might got a message shown below. It indicates that the geometry of your
current route is Impossible to sail for a vessel. Typically it is enough if you:
1. decrease the radius of turn of the waypoint or its neighbours
2. change lat/lon position of the waypoint or its neighbours
228 • • • • Route planning
Advertisement
Table of Contents
