Table of Contents
Advertisement
How to use the Curved EBL
Curved EBL is a design and control tool to start a turn at correct position and to monitor behaviour of the own ship
during turn. The Curved EBL is available on ECDIS screen and on some selected ARPA radar displays.
Before turn you can use the Curved EBL to select best position to initiate intended turn. In this so called design
phase the own ship pushes Curved EBL in front of the ship. This design phase is available in:
•
Program Track Turn of the Trackpilot
•
Program Course Change of the Trackpilot
•
Radar steering (available only with selected ARPA radar models)
The Curved EBL is locked to its position when the own ship start a turn initiated by
•
Automatic Route Steering: Goto WP or Goto Track
•
Program Track Turn of the Trackpilot
•
Program Course Change of the Trackpilot
•
Radar steering: New set course from ARPA radar (available only with selected models)
During the turn you can monitor how your ship performs the intended manoeuvre against the plan by comparing the
Curved EBL position and your current own ship position.
382 • • • • Steering with EMRI Trackpilot
Design Curved EBL before the wheel over point.
Curved EBL at the wheel over point.
Advertisement
Table of Contents
