Table of Contents
Advertisement
Open ARCS chart by position
To open an ARCS chart by position of own ship or by chart center, if your display is in TM RESET OFF status, use
Open by position command. Then you get a list of charts which cover current position. To open chart by position,
proceed as followed:
180 • • • • Raster Chart material
1.
From Control Panel press CHART PLAN push button.
2.
From menu check that there is a following text in first line: Activate S57
chart. If it is, then go to step 4.
3.
If there is text Activate ARCS chart choose this command.
4. Select Open from the menu and by Position from sub menu. There will
appear ARCS Open dialog box
Select desired chart from a list box and press Open.
Advertisement
Table of Contents
