Erasing The Center And The Border (Erase Center/Border) - Ricoh AD1 Reference Operation Manual

ERASING THE CENTER AND THE BORDER
The machine can make copies of a
book or magazine originals by eras-
ing the shadow at the center and/or
four sides of copy paper.
There are three ways to make copies:
• Center
The machine erases the shadow at the center of copy paper.
• Border
The machine erases the shadow at the four sides of copy paper
• Center/Border
The machine erases the shadow at the center and four sides of copy paper.
The default setting of the margin width is as follows:
• Metric version: 10 mm
• Inch version: 0.4"
You can specify the margin width as follows. Change the default settings to specify
the margin position and width. ⇒ See page 61.
• Metric version: 3 to 50 mm in 1 mm steps
• Inch version: 0.1" to 2.0" in 0.1" steps
Areas you do not want to delete might be erased if you use non-standard size
paper.
You cannot use the bypass tray with this feature.

ERASING THE CENTER AND THE BORDER (Erase Center/Border)

(Erase Center/Border)
Erasing the center
A B
Erasing the border
A B
Erasing the center/border
A B
A B
A B
A B
39