Table of Contents
Advertisement
6
Boiler Assembly
6.5
Burner Door and Burner
A DANGER!
The burner door can be installed to swing to the left or
right.
through falling parts.
J NOTICE!
Change the door opening only when the door is
closed and bolted.
The recesses (Fig. 21, Item. 2) in the boiler
door (2 left and 2 right) have been provided for
lifting with a crane or hoist, for example for the
complete removal of the door.
Push the hinge bolts (Fig. 21, Item. 1) out from the
bottom through the top.
Insert both hinge bolts with washers on the opposite
side (Fig. 21).
Do not forget to use the washers!
Observe the burner manufacturer's installation
instructions!
Use or modify (drilled burner plate - accessory) the
J NOTIVCE!
appropriate burner plate subject to burner make and
type.
Seal the gap between the blast tube (Fig. 22,
Item. 2) and the thermal insulation (Fig. 22,
Item. 1) on site using the insulation rings
supplied (Fig. 22, Item. 3)! Cut insulation rings
to required dimensions.
We reserve the right to make any changes due to technical modifications!
18
Fig. 21 Burner door
Fig. 22 Burner installation
Item. 1: Thermal insualtion
Item. 2: Blast tube
Item. 3: Insulation rings
Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de
Boiler Installation and Maintenance Manual SB735 • Issue 10/2003
1
2
2
1
8 ¼
1
2
3
Hide quick links:
Advertisement
Table of Contents
