Table of Contents
Advertisement
Boiler Assembly
4
Fig. 13 Bottom cross brackets (top view)
Secure the lower front cross brackets (Fig. 13, Item.
3) to the boiler body using two bolts.
Secure the lower rear cross bracket (Fig. 13, Item. 1)
to the boiler body using two bolts.
Secure the left and right spacer plates (Fig. 13,
Item. 5) to the lower cross bracket using three bolts
and washers each (Fig. 13, Item. 6).
Use the holes Item. a for boiler models 790 and 970.
Use the holes Item. b for boiler model 1200.
The lateral blue covers (Fig. 13, Item. 2) comprise
two components, which must be pre.assembled
(Fig. 13, Item. c: screw position for model 790 and
Item. d: screw position for models 970 and 1200).
Hook-in both covers centrally behind the bracket and
align horizontally, then join both pieces with two bolts.
Secure the left and right side of the cover (Fig. 13,
Item. 2) to the front and rear using one bolt each.
Secure the blue cover (Fig. 13, Item. 4) at the left and
right front of the cover (Fig. 13, Item. 2) using two
bolts respectively.
We reserve the right to make any changes due to technical modifications!
Boiler Installation and Maintenance Manual SB735 • Issue 10/2003
1
2
5
3
4
6
6
6
Item. 1:
Rear cross bracket
Item. 2:
Lateral covers
Item. 3:
Front cross bracket
Item. 4:
Front cross bracket cover
Item. 5:
Spacer plate
Item. 6:
Position of bolts on the spacer plate for boiler
models 790 and 970 and 1200 (top view)
Pos. a:
Position of bolts on the spacer plate for boiler
models 790 and 970 (top view)
Pos. b:
Position of bolts on the spacer plate for boiler model
1200 (top view)
Pos. c:
Position of the bolts on the lateral blue covers for
boiler models 790 and 970 (side view)
Pos. d:
Position of the bolts on the lateral blue covers for
boiler model 1200 (side view)
Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de
a
b
2
5
5
6
2
c
d
13
Hide quick links:
Advertisement
Table of Contents
