Boiler Jacket - Pack C - Buderus SB735 Series Installation And Maintenance Manual

6 Boiler Assembly
J NOTICE!
6.8

Boiler Jacket - Pack C

The rear wall consists of seven parts (Fig. 26).
Secure the rear wall section (Fig. 26, Item. 1) with
two self-tapping screws per side (left and right) on the
side wall edges.
Secure the small central rear wall section (Fig. 26,
Item. 6) on the lower rear wall section (edge pointing
inwards) using two self-tapping screws (Fig. 26,
Item. 1).
Locate the central rear wall section (Fig. 26, Item. 2)
with the Z-profile behind the lower rear wall section
on the edge of the side wall and secure on the left
and right side with two self-tapping screws each.
Insert the upper rear wall section (Fig. 26, Item. 3)
with Z-profile behind the central rear wall section on
the edge of the side wall, and secure on the left and
right side with two self-tapping screws each.
Hook the upper small rear wall section (Fig. 26,
Item. 4) with the bracket into the upper rear wall
section, and secure with a self-tapping screw.
Secure one or two cable clips (Fig. 26, Item. 5) or a
cable duct on the upper rear wall section.
Secure the left and right locking plate (Fig. 26,
Item. 7) on the side wall using two self-tapping
screws respectively.
We reserve the right to make any changes due to technical modifications!
20
3
2
1
7
Fig. 26 installation of the rear wall section
Item. 1: Lower rear wall section
Item. 2: Central rear wall section
Item. 3: Upper rear wall section
Item. 4: Upper small rear wall section
Item. 5: Cable clip
Item. 6: Central small rear wall section
Item. 7: Left and right locking plate
Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de
Boiler Installation and Maintenance Manual SB735 • Issue 10/2003
4
5
6