Table of Contents
Advertisement
5
Anti-Vibration Supports
5
Anti-Vibration Supports
Anti-vibration supports are standard equipment on
the SB735/1200 model; they can be ordered
separately for the other models.
Insert the longer part of the longitudinal anti-vibration
bracket (Fig. 3, Item. 4) from the front and the
shorter part (Fig. 3, Item. 3) from the rear into the
channel sections (Fig. 3, Item. 2).
Position both rails of the anti-vibration boiler support,
in accordance with dimensions shown in Table 4, on
J NOTICE!
the floor where the boiler is to be installed.
Prepare the foundation, where the anti-vibration
supports are to be located, with a smooth trowel
of ±1/8" per linear foot and with a slight rise to
the back. This ensures an even load distribution
over the longitudinal anti-vibration brackets,
and adequate boiler ventilation.
Position, align and place the boiler on the supports.
The boiler support should be flush with the boiler
back wall. The end-stop plates (Fig. 3, Item. 1)
should contact the channel section of the boiler.
We reserve the right to make any changes due to technical modifications!
8
Fig. 3
Anti-vibration support
Item. 1:
End-stop plates
Item. 2:
Channel section
Item. 3:
Short anti-vibration bracket
Item. 4:
Long anti-vibration bracket
Boiler
Type
SB735
Table. 4 Support dimensions
1)
Standard delivery
2)
Accessories
Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de
Boiler Installation and Maintenance Manual SB735 • Issue 10/2003
1
4
3
Boiler-
Length
Model
F
[Inch]
1)
90
1200
2)
90
970
2)
73
½
790
2
Distance
C
[Inch]
46
43
¾
44
Hide quick links:
Advertisement
Table of Contents
