Buderus SB735 Series Installation And Maintenance Manual page 2

Introduction
F This equipment conforms to the following
European and US requirements:
– 90/396/EWG European gas fired
guidelines
Standards: EN 677, EN 303-1,
– 92/42/EWG
– 73/23/EWG
– 89/336/EWG EMV- European
– 97/23/EG
Standard:
– ASME Boiler and Vessel Pressure
Code
Confirmation regarding confirmity with
respect to these guidelines can be obtained
upon request from Buderus Hydronic
Systems, Inc.
Technical Changes!
Buderus Hydronic Systems, Inc. reserves the right to
this make changes due to continued technological and
engineering improvments.
Updating Technical Informations
Please contact us if you have suggestions for improving
this manual or when you have noticed incorrect
information.
Manufacturers Address:
Buderus Hydronic Systems, Inc.
50 Wentworth Ave
Londonderry, New Hampshire 03053
www.buderus.net
Document number: 6302 2320
Issue: 10/2003
We reserve the right to make any changes due to technical modifications!
2
EN 303-3, DIN 4702-6
European efficiency
guidelines
European low voltage
guidelines
electromechanical code
guidelines
European pressure
vessel guidelines
TRD 702
Boiler Installation and Maintenance Manual SB735 • Issue 10/2003
Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de