Buderus SB735 Series Installation And Maintenance Manual page 12

6 Boiler Assembly
The horizontal brackets (L-brackets) comprise of two
components, which must be pre-assembled.
Join both bracket components with two bolts and two
nuts (Fig. 11).
Hook the first bracket (Fig. 12, Item. 1) with the
U-shaped edge into the respective recess of the
front, center and rear cross brackets.
The bracket is secured at the front hole and the rear
slot using one self-tapping screw each (Fig. 12).
Hook the second bracket (Fig. 12, Item. 3) with the
U-shaped edge into the respective recess of the
front, centre and rear cross brackets.
The bracket is secured at the front hole and the rear
slot using one self-tapping screw each (Fig. 12).
Align the central cross bracket horizontally.
We reserve the right to make any changes due to technical modifications!
12
Fig. 11 Longitudinal (L-)bracket
2
1
Fig. 12 Secure the longitudinal bracket with bolts suppplied
Item. 1: Horizontal bracket
Item. 2: Central cross bracket
Item. 3: Horizontal bracket
Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de
Boiler Installation and Maintenance Manual SB735 • Issue 10/2003
3