Number Of Rings - AT&T TL88102 User Manual

Answering system
Answering system settings

Number of rings

You can set the answering system to answer an incoming call after two,
four or six rings; or toll saver. With toll saver selected, the answering system
answers after two rings when you have new messages, and after four
rings when you have no new messages. This enables you to check for new
messages and avoid paying unnecessary long distance charges if you are
calling from out of your local area.
Using the telephone base:
1. Press the MENU soft key when the telephone base is not in use.
2. Press the SELECT soft key to select
3. Press or p
q
CID
SELECT soft key. The corresponding icon,
screen.
4. Press or p
q
CID
press the SELECT soft key.
5. Press or p
q
CID
the SELECT soft key.
or p
6. Press
q
CID
then press the SET soft key to confirm your setting.
There is a confirmation tone. Or press CANCEL to exit
to the previous menu without making any changes.
Using the handset:
1. Press the MENU soft key when the handset is not in use.
2. Press the SELECT soft key to select ANSWERING SYS.
3. Press or p
q
CID
SELECT soft key. The corresponding icon,
screen.
4. Press or p
q
CID
the SELECT soft key.
or p
5. Press
q
CID
SELECT soft key.
or p
6. Press q
CID
press the SET soft key to confirm your setting. There is a
confirmation tone. Or press the BACK soft key to exit to
the previous menu without making any changes.
to select Answering sys.
to choose Mailbox 1 or Mailbox 2, then press the
DIR
to scroll to Ans sys setup, then
DIR
to scroll to # of rings, then press
DIR
to choose 2, 4, 6, or Toll saver,
DIR
to choose Mailbox 1 or Mailbox 2, then press the
DIR
to scroll to Ans sys setup, then press
DIR
to scroll to # of rings, then press the
DIR
to choose 2, 4, 6, or Toll saver, then
DIR
or
1
1
or
65
, flashes on the
2
Announcement
# of rings
Remote code
# OF RINGS
2
4
, flashes on the
2
ANS SYS SETUP
Announcement
# of rings
Remote code
BACK
# OF RINGS
2
4
6
BACK
1
SELECT
1
SELECT
1
SELECT
1
SET