AT&T TL88102 User Manual page 67

Answering system
Answering system settings
Using the handset:
1. Press the MENU soft key menu when the handset is not in use.
2. Press the SELECT soft key to select ANSWERING SYS.
or p
3. Press q
CID
SELECT soft key. The corresponding icon,
screen.
or p
4. Press q
CID
the SELECT soft key.
or p
5. Press q
CID
press the SELECT soft key.
6. The handset announces, "To play, press 2. To record,
press 7." Press 7 to record and the screen shows
Recording announcement..., or press the BACK soft key
to exit to the previous menu.
7. The handset announces, "Record after the tone. Press 5
when you are done." After the tone, speak towards the
handset.
8. Press 5 or the STOP soft key when finished recording.
9. The answering system automatically plays back the newly
recorded announcement. Press 5 to stop the playback at
any time; 2 to replay the recorded announcement; or 7 to
record again if desired.
NOTES:
• Your announcement can be up to 90 seconds in length.
• Announcements shorter than two seconds are not recorded.
to choose Mailbox 1 or Mailbox 2, then press the
DIR
to scroll to Ans sys setup, then press
DIR
to scroll to Announcement, then
DIR
1
or
61
, flashes on the
2
ANS SYS SETUP
Call screening
Announcement
# of rings
BACK
ANNOUNCEMENT
2-Play 3-Delete
7-Record
BACK
Recording
announcement...
Announcement
playback
BACK
1
SELECT
1
1
STOP
1