AT&T TL88102 User Manual page 43

Multiple Handset use
Conference Call
To initiate an intercom call while on a conference call:
When you initiate an intercom call during a conference call, it places all
participants in the conference call on hold.
1. Press INT on the handset (see To initiate an intercom call with a handset
on page 32).
-OR-
Select Intercom in the OPTION menu on the telephone base, then press
the SELECT soft key (see To initiate an intercom call from the telephone
base on page 32).
2. To reconnect to the conference call, press the END soft key, INT or
on the handset to end the intercom call.
-OR-
Press the END soft key, CANCEL,
telephone base to end the intercom call.
3. Press LINE 1/
/LINE 2 on the telephone base to reconnect to the conference call.
To end a conference call:
Press OFF on the handset or put the handset back in the telephone base
•
or charger.
-OR-
• Press the OPTION soft key on the handset or telephone base. Then
press or p
q
CID
End Conference.
-OR-
/LINE 1 or
• Press
or LINE 2/
FLASH
on the handset or on the telephone base to select
DIR
/LINE 2 on the telephone base.
/LINE 1 or
on the handset or
FLASH
37
/LINE 2 on the
/LINE 1 or
OFF