Call Intercept; Base Ringer; Temporarily Turning Off The Message Alert Tone - AT&T TL88102 User Manual

Answering system
About the answering system

Call intercept

If you want to talk to the caller who is leaving a message on line 1, press
LINE 1/ on the handset or press
FLASH
If you want to talk to the caller who is leaving a message on line 2, press
LINE 2/
on the handset or press
FLASH

Base ringer

Press q/VOLUME/p on the telephone base to adjust the ringer volume of
both line 1 and line 2 when the telephone is not in use.
You hear a sample of the ringer while adjusting the volume. The telephone
base shows Ringer muted when you turn the ringer off.

Temporarily turning off the message alert tone

If the message alert tone is turned on, the telephone base beeps every
10 seconds when there are new messages. Pressing any telephone base
key temporarily silences the message alert tone.
/LINE 1 on the telephone base.
/LINE 2 on the telephone base.
70