Number Of Rings; Ringer Volume - AT&T DL72250 Quick Start Manual

Initial basic settings
Using a cordless handset:
1. MENU ->
/
2. SELECT to select Announcement.
3. Press 7 to record.
4. Speak towards the handset to record your announcement and press
recording and save it.

Number of rings

You can set the answering system to answer an incoming call after 2, 3, 4, 5, or 6
rings. You can also select toll saver. If you choose toll saver, the answering system
answers a call after two rings when you have new messages, or after four rings
when there are no new messages. This enables you to check for new messages
and avoid paying unnecessary long distance charges if you are calling from out of
your local area.
Using a cordless handset:
1. MENU ->
/
2. / -> Ans sys setup -> SELECT.
-> # of rings -> SELECT.
3. /
4. / to choose among 2, 3, 4, 5, 6, or Toll saver -> SELECT.

Ringer volume

You can set the ringer volume level to one of the six levels, or turn the ringer off,
for incoming home or cell calls.
Using a cordless handset:
Set ringer volume for incoming home calls:
1. MENU -> /
SELECT to select Home volume.
2.
3. / to choose the desire level -> SELECT.
Set ringer volume for incoming cell calls:
1. MENU ->
/
to to select Cell volume
2. /
to choose the desire level -> SELECT.
3. /
-> Answering sys -> SELECT.
-> Answering sys -> SELECT.
-> Ringers -> SELECT.
-> Ringers -> SELECT.
->
SELECT.
12
5 to end