Multiple Handset use
Conference Call
Share an outside call
You can let another system handset or telephone base join you on an outside
call. That call continues until all participants hang up.
•
During a call on line 1, press LINE 1/
on the telephone base to join the call.
•
During a call on line 2, press LINE 2/
on the telephone base to join the call.
NOTE: You cannot press
/SPEAKER on the handset picks the first available line to make a new call.
pressing
Conference line 1 and line 2 calls
While you are on a call on line 1, and line 2 is on hold or in use, you can
conference line 1 and line 2 using the handset or the telephone base.
To conference both line 1 and line 2 calls:
1. While on a call, press the OPTION soft key on the handset or the
telephone base.
2. Press the SELECT soft key to select Conference. The
handset or the telephone base shows Lines 1 and 2 in
conference for a few seconds.
To select an option while on a conference call:
1. Press the OPTION soft key on the handset or telephone
base.
2. Press
or p
q
CID
base to select one of the following options:
•
End line 1 - external parties originally on line 1 ended
•
End line 2 - external parties originally on line 2 ended
•
End Conference
•
Intercom - option on the telephone base only
•
Directory
•
Call log
•
Redial last #
3. Press the SELECT soft key.
/SPEAKER on the handset to join the outside call. Instead,
on the handset or on the telephone
DIR
on the handset or
FLASH
on the handset or
FLASH
36
/LINE 1
/LINE 2
1
2
Conf.
0:05:35
800-595-9511
12:45am
12/31
MUTE
OPTION
1
2
Conf.
0:05:35
800-624-5688
12:45am
12/31
MUTE
OPTION