Hold - AT&T TL88102 User Manual

Telephone operation
Options while on call

Hold

During a call, you can place a call on hold. You hear an alert tone if you have
not taken the call off of hold after 14 minutes. You hear another alert tone
30 seconds later. At 15 minutes on hold, the call automatically disconnects.
To place a call on hold using the handset or telephone base:
Press HOLD on the handset or telephone base.
• L1)ON HOLD appears on the screen while you are on
a call on line 1.
telephone base.
• L2)ON HOLD appears on the screen while you are on
a call on line 2.
telephone base.
To resume a call on hold using the handset or telephone
base:
• On the handset, press the corresponding line button,
/FLASH, to resume the call.
LINE 2
• On the telephone base, press the corresponding line button,
/LINE 2, to resume the call.
flashes on the handset and the
1
flashes on the handset and the
2
28
1 2
L1)ON HOLD
L2)ON HOLD
12:45am
1 2
L1)ON HOLD
L2)ON HOLD
12:45am
REDIAL
/FLASH or
LINE 1
/LINE 1 or
12/31
MENU
12/31
MENU