AT&T TL88102 User Manual page 66

Answering system
Answering system settings
To record a new outgoing announcement:
Using the telephone base:
/REC while the telephone base is not in use.
1. Press
•
or p
2. Press
q
CID
press the SELECT soft key.
or p
3. Press q
CID
then press the SELECT soft key. The corresponding icon,
or
flashes on the screen.
1 2,
4. The telephone base announces, "Record after the tone.
Press 5 when you are done." After the tone, speak
towards the telephone base. Press 5 or the STOP soft
key when finished recording.
5. The answering system automatically plays back the newly recorded
announcement. Press 5 to stop the playback at any time.
-OR-
1. Press the MENU soft key when the telephone base is not in use.
2. Press the SELECT soft key to select
or p
3. Press q
CID
SELECT soft key. The corresponding icon,
screen.
or p
4. Press q
CID
key.
or p
5. Press q
CID
press the SELECT soft key.
6. The telephone base announces, "To play, press 2. To
record, press 7." Press 7 to record and the screen
shows Recording announcement..., or press CANCEL
to exit to the previous menu.
7. The telephone base announces, "Record after the tone.
Press 5 when you are done." After the tone, speak
towards the telephone base. Press 5 or the STOP soft
key when finished recording.
8. The answering system automatically plays back
the newly recorded announcement. Press 5 to stop
the playback at any time; 2 to replay the recorded
announcement; or 7 to record again if desired.
NOTES:
• Your announcement can be up to 90 seconds in length.
• Announcements shorter than two seconds are not recorded.
to choose Announcement, then
DIR
to choose Mailbox 1 or Mailbox 2,
DIR
to select Answering sys.
to choose Mailbox 1 or Mailbox 2, then press the
DIR
to scroll to Ans sys setup, then press the SELECT soft
DIR
to scroll to Announcement, then
DIR
or
1
60
RECORD
Memo
Announcement
, flashes on the
2
Call screening
Announcement
# of rings
ANNOUNCEMENT
2-Play 3-Delete
7-Record
Recording
announcement...
Announcement
playback
SELECT
1
SELECT
1
1
STOP
1