AT&T TL88102 User Manual page 89

Appendix
Screen display messages
L1)ON HOLD
L2)ON HOLD
Line 1 Incoming cal l
Line 2 Incoming cal l
Microphone ON
Microphone off
No signal, cal l ended
Not available at this time
Out of range OR
no power at base
Paging al l handsets
**Paging**
Place handset in charger
Ringer muted
Saved
Unable to cal l try again
Unable to save
Line 1 is on hold.
Line 2 is on hold.
There is an incoming call on line 1.
There is an incoming call on line 2.
MUTE is turned off and the person on the other end
can hear you.
You have turned off the handset microphone. The
other party cannot hear you but you can hear the
other party.
Communication between the system handset and
telephone base is lost during a call.
One system handset or the telephone base is
already viewing the call log or directory and
another handset/telephone base attempts to review
it.
The system handset cannot communicate with the
telephone base. Check the telephone base power
connection or move closer.
The telephone base is paging handset(s).
The system handset is paged.
The battery is very low. Place the system handset in
the telephone base for recharging.
The ringer is muted temporarily during an incoming
call.
Your selection has been saved.
You try to make an intercom call but the system
handset/telephone base you are calling is in the
directory, in the call log, on an outside call, or the
system handset is out of range.
You try to save a caller ID entry with no name or
number.
83