Number Of Rings; Ringer Volume; Lcd Language - AT&T BL102-1S Quick Start Manual

Initial basic settings
4. Speak towards the handset to record your announcement and press
recording and save it.

Number of rings

You can set the answering system to answer an incoming call after 2, 3, 4, 5, or 6
rings. You can also select toll saver. If you choose toll saver, the answering system
answers a call after two rings when you have new messages, or after four rings
when there are no new messages. This enables you to check for new messages and
avoid paying unnecessary long distance charges if you are calling from out of your
local area.
Using a cordless handset:
1. MENU ->
/
2. / -> Ans sys setup -> SELECT.
-> # of rings -> SELECT.
3. /
4. / to choose among 2, 3, 4, 5, 6, or Toll saver -> SELECT.

Ringer volume

You can set the ringer volume level to one of the six levels, or turn the ringer off.
When the ringer is off,
Using a cordless handset:
1. MENU -> /
SELECT to select Home volume.
2.
to choose the desire level -> SELECT.
3. /

LCD language

Using a cordless handset:
1. MENU ->
/
2. SELECT again to select LCD language.
3. / to choose English, Français or Español
Note: If you accidentally change the LCD language to French or Spanish, you can reset it back
to English without going through the French or Spanish menus.
Press MENU on the handset in idle mode -> enter *364#; or
f
Press MENU on the base in idle mode -> enter 364#.
f
-> Answering sys -> SELECT.
appears on the screen.
-> Ringers -> SELECT.
-> Settings -> SELECT.
-> SELECT.
11
5 to end