Call Screening - AT&T TL88102 User Manual

Answering system
Answering system settings

Call screening

The call screening feature lets you listen at the telephone base to a caller
leaving a message. You can turn this feature on or off with either your
handset or telephone base. Unless you change it, the call screening feature is
preset to on.
Using the telephone base:
1. Press the MENU soft key when the telephone base is not in use.
2. Press the SELECT soft key to select Answering sys.
or p
3. Press q
CID
Mailbox 2, then press the SELECT soft key. The
corresponding icon,
or p
4. Press q
CID
press the SELECT soft key.
5. Press the SELECT soft key again to select
Call screening.
or p
6. Press q
CID
the SET soft key to confirm your setting. There is a
confirmation tone. Or press CANCEL to exit to the
previous menu without making any changes.
Using the handset:
1. Press the MENU soft key when the handset is not in use.
2. Press the SELECT soft key to select ANSWERING SYS.
or p
3. Press q
CID
SELECT soft key. The corresponding icon
screen.
or p
4. Press q
CID
press the SELECT soft key.
or p
5. Press q
CID
press the SELECT soft key.
or p
6. Press q
CID
the SET soft key to confirm your setting. There is a
confirmation tone. Or press the BACK soft key to exit to
the previous menu without making any changes.
to choose Mailbox 1 or
DIR
or
1 2,
to scroll to Ans sys setup, then
DIR
to select On or Off, then press
DIR
to choose Mailbox 1 or Mailbox 2, then press the
DIR
to scroll to Ans sys setup, then
DIR
to scroll to Call screening, then
DIR
to select On or Off, then press
DIR
flashes on the screen.
1
or
64
Delete all old
Record memo
Ans sys setup
Call screening
Announcement
# of rings
CALL SCREENING
On
Off
, flashes on the
2
ANS SYS SETUP
Answer ON/OFF
Call screening
Announcement
BACK
CALL SCREENING
On
Off
BACK
1
SELECT
1
SELECT
1
SET
1
SELECT
1
SET