Set Date/Time - AT&T TL88102 User Manual

Telephone settings
Telephone base settings

Set date/time

The answering system announces the day and time of each message prior
to playing it. If you subscribe to caller ID service, the day, month and time
are set automatically with each incoming call. The year must be set so that
the day of the week can be calculated from the caller ID information. Before
using the answering system, set the date and time as follows.
1. Press the MENU soft key when the telephone base is not in use.
or p
2. Press q
CID
or p
3. Press
q
CID
the SELECT soft key.
4. Use the dialing keys (0-9) to enter the month in two-
digit format, or press
correct setting, then press the SET soft key to move to
set the day.
5. Use the dialing keys (0-9) to enter the day in two-digit
format, or press
setting, then press the SET soft key to move to set the
year.
6. Use the dialing keys (0-9) to enter the year in two-digit
format, or press
setting, then press the SET soft key to move to set the hour.
7. Use the dialing keys (0-9) to enter the hour in two-digit format, or press
or p
q
CID DIR
move to set the minute.
8. Use the dialing keys (0-9) to enter the minute in two-digit format, or press
or p
q
CID DIR
or p
9. Press q
CID
key to confirm.
NOTE: If the clock is not set when a message is recorded, the system announces, "Time
and day not set," before it plays the message.
to scroll to Settings, then press the SELECT soft key.
DIR
to select Set date/time, then press
DIR
or p
q
CID
or p
q
CID DIR
or p
q
CID DIR
to choose the correct setting, then press the SET soft key to
to choose the correct setting, then press the SET soft key.
to choose between AM or PM, then press the SET soft
DIR
to choose the
DIR
to choose the correct
to choose the correct
21
Key tone
Set date/time
Home area code
SELECT
SET DATE
12/31/09
MM/DD/YY
SET
SET TIME
03:45 AM
SET