Dect 6.0 expansion handset for use with at&t models tl92278/tl92328/tl92378 cordless telephone/answering system with bluetooth wireless technology (44 pages)
Dect 6.0 cordless telephone/answering system with bluetooth wireless technology (130 pages)
Summary of Contents for AT&T TL32100
Page 1
Quick start guide TL32100/TL32200/TL32300 DECT 6.0 cordless telephone/ answering system with caller ID/call waiting...
Page 2
You must install and charge See pages 2 through 4 for easy the battery before using the instructions. cordless handset. Install the telephone base close to a telephone wall jack and an electrical outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see Wall mount installation in the user’s manual).
Telephone base and charger installation Install the telephone base and charger as shown below. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack.
Battery installation and charging Battery installation Install the battery as shown below. Plug the battery Insert the supplied battery Align the cover flat against with the label THIS SIDE connector securely the battery compartment, UP facing up as indicated. into the socket inside then slide it upwards until the handset battery it clicks into place.
Page 5
Battery installation and charging Battery charging Once you have installed the battery, the screen indicates HANDSET 1 the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use.
Quick reference guide REDIAL/PAUSE DIR/VOLUME Press repeatedly to view the Press to scroll up while in last 20 numbers dialed. menus. While entering numbers, Press to increase the listening press and hold to insert a volume. dialing pause. Press to show directory entries when the handset is PHONE/FLASH not in use.
Quick reference guide EQUALIZER During an outside call, intercom call, message or announcement playback, press to change the quality of the audio to best suit your hearing. The > symbol indicates the feature to select. Main menu >Play messages Play messages Answering sys Answering sys Directory...
Quick reference guide HANDSET LOCATOR Press to make handsets beep so you can locate them. Message window Displays the number of messages. During playback, displays the message number currently playing. PLAY/STOP Press to start or stop message playback. While call screening, press to temporarily turn the call screening on or off.
Answering system settings - announcement The announcement is the greeting callers hear when calls are answered by the answering system. The telephone has a default announcement, “Hello. Please leave a message after the tone.” You can use this announcement, or record your own announcement.