Installing Printer Software For Windows Nt 3.51 - Tektronix Phaser 380 Service Manual

Installing printer software for Windows NT 3.51

Easy Install
The following files are copied to the
hard disk:
QuarkXPress PDF
(installs an application-specific printer
description file)
PhaserPrint Plug-in for Photoshop
(installs an application-specific plug-in, if
the application if found)
Samplers
(installs color sampler charts and a fonts
sampler)
1.
Insert either the printer's CD-ROM or the Windows Disk 1 into the
appropriate drive on the computer.
2. Select Run from the File menu.
3. Type in the drive for the CD-ROM or diskette, type SETUP.EXE, and
click OK.
4.
Click Next in the two introduction screens in the Installer.
5. In the Select Installation Type dialog box, select either Easy
Installation or Custom Installation, and click Next.
Custom Install
1. In the Driver Installation dialog box, select from the following
options:
Drivers/PPDs
(installs driver files and printer description files)
QuarkXPress PDF
(installs an application-specific printer description file)
PhaserPrint Plug-in for Photoshop
(installs an application-specific plug-in, if the application if
found)
2. Click Next.
3. In the Custom Install: Select Utilities dialog box, select from the
following options:
Printer Utilities
(installs utility files for selecting printer features)
Network Utilities
(installs utility files for using the printer on a network)
Samplers
(installs color sampler charts and a fonts sampler)
Use the default Destination Directory or click Browse.
4. Click Next. The files are copied to the hard disk.
6.
The Finish Installation dialog box contains instructions for
completing the printer software setup; click Next. The Print Manager
opens automatically.
7. From the Printer menu select Create Printer.
8.
In the Create Printer dialog box, under Driver, select Other.
9. Type in the drive for the printer's CD-ROM or diskette, click OK.
Installing the Printer and Drivers
Service Manual
2
2-29