Figure 8-46 Removing The Power Control Board - Tektronix Phaser 380 Service Manual

Hide thumbs Also See for Phaser 380:

Table of Contents

Field Replaceable Unit Disassembly/Assembly

Figure 8-46 Removing the power control board

Phaser 380 Color Printer

Remove the four screws securing the power control board to the

engine frame. Lift slightly and remove the power control board.

wiring harness

to power supply

Reverse these steps to install the power control board.

NVRAM. Transfer IC M15 from the old board to the new board to preserve printer

NVRAM settings and calibration values.