Maintenance Tray Guides; Figure 8-39 Removing The Maintenance Tray Guide - Tektronix Phaser 380 Service Manual

Maintenance tray guides

Tools required
Magnetic screwdriver
#2 Phillips tip
1.
Power down the printer.
2. Open the front cover and remove the maintenance tray.
3. For each maintenance tray guide, remove the E-ring securing the
white plastic maintenance tray lift arm to the maintenance tray guide.
4.
For each maintenance tray guide, remove the three screws securing it
to the inside of the printer side frame. Remove the guide.
Remove
3 screws
C-clip

Figure 8-39 Removing the maintenance tray guide

Reverse these steps to install the maintenance tray guides.
Field Replaceable Unit Disassembly/Assembly
Needle nose-pliers
Small, flatblade screwdriver
Service Manual
8
9661-38
8-61