8
Field Replaceable Unit Disassembly/Assembly
Network card
8-74
Phaser 380 Color Printer
1.
Power down the printer. Leave the power cord plugged in to provide
a ground path for static discharges. Remove the interface cable.
2.
Loosen the two securing screws holding the Phaser Share network
card and remove it.
3.
Slide in the replacement network card and tighten the two thumb
screws.
4.
Swap the socketed NVRAM chip on the new network card with the
old card so that the printer's network parameters are retained.
NVRAM
Network
card
Loosen
screws
Figure 8-50 Installing the network card in the printer
5.
Reconnect the interface cables. Turn on the printer and print the
configuration page; it lists information regarding the Ethernet
interface.
6.
Affix the Ethernet address label to the underside of the top cover
where it can easily be accessed.
9661-47