Figure 8-10 Removing The Accumulator - Tektronix Phaser 380 Service Manual

Hide thumbs Also See for Phaser 380:

Table of Contents

Field Replaceable Unit Disassembly/Assembly

Phaser 380 Color Printer

Tools required

Magnetic screwdriver

#2 Phillips tip

Turn off the printer and remove the power cord.

Remove the right-side panel as explained in the earlier topic, "Cabinet

panels and covers" on page 8-4.

Disconnect the two vacuum hoses leading to the accumulator.

Remove the two screws securing the accumulator bracket to the

printer frame.

Remove the two screws securing the accumulator to its bracket.

Remove the accumulator.

Figure 8-10 Removing the accumulator

Reverse these steps to install the accumulator.