Cisco Catalyst 3030 Command Reference Manual page 286

service-policy
Switch(config-if)#ser input vlan-plcmap
Switch(config-if)#exit
Switch(config)#exit
Switch#
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
policy-map
show policy-map
show running-config
Cisco Catalyst Blade Switch 3030 Command Reference
2-258
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Description
Creates or modifies a policy map that can be attached to multiple ports to
specify a service policy.
Displays QoS policy maps.
Displays the running configuration on the switch. For syntax information,
select Cisco IOS Configuration Fundamentals Command Reference,
Release 12.2 > File Management Commands > Configuration File
Management Commands.
78-17262-01