Debug Port-Security - Cisco Catalyst 3030 Command Reference Manual

debug port-security

debug port-security
Use the debug port-security privileged EXEC command to enable debugging of the allocation and
states of the port security subsystem. Use the no form of this command to disable debugging.
Syntax Description This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines The undebug port-security command is the same as the no debug port-security command.
Related Commands Command
show debugging
show port-security
Cisco Catalyst Blade Switch 3030 Command Reference
B-58
debug port-security
no debug port-security
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Displays port-security settings for an interface or for the switch.
Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands
78-17262-01