Show Platform Mvr Table - Cisco Catalyst 3030 Command Reference Manual

show platform mvr table

show platform mvr table
Use the show platform mvr table privileged EXEC command to display the platform-dependent
Multicast VLAN Registration (MVR) multi-expansion descriptor (MED) group mapping table.
Syntax Description
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco Catalyst Blade Switch 3030 Command Reference
C-14
show platform mvr table [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C Cisco Catalyst Blade Switch 3030 Show Platform Commands
78-17262-01