Show Mls Qos Input-Queue - Cisco Catalyst 3030 Command Reference Manual

show mls qos input-queue

show mls qos input-queue
Use the show mls qos input-queue user EXEC command to display quality of service (QoS) settings
for the ingress queues.
Syntax Description
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)SEE
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mls qos input-queue command:
Switch> show mls qos input-queue
Queue
----------------------------------------------
buffers
bandwidth :
priority
threshold1:
threshold2:
Cisco Catalyst Blade Switch 3030 Command Reference
2-364
show mls qos input-queue [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
: 1 2
: 90 10
4 4
: 0 10
100 100
100 100
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
78-17262-01