Show Platform Backup Interface - Cisco Catalyst 3030 Command Reference Manual

Appendix C Cisco Catalyst Blade Switch 3030 Show Platform Commands

show platform backup interface

Use the show platform backup interface privileged EXEC command to display platform-dependent
backup information used in a Flex Links configuration.
Syntax Description
interface-id
dummyQ
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
78-17262-01
show platform backup interface [interface-id | dummyQ] [ | {begin | exclude | include}
expression]
(Optional) Display backup information for all interfaces or the specified
interface. The interface can be a physical interface or a port channel.
(Optional) Display dummy queue information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3030 Command Reference
show platform backup interface
C-3