Boot Boothlpr - Cisco Catalyst 3030 Command Reference Manual

boot boothlpr

boot boothlpr
Use the boot boothlpr global configuration command to load a special Cisco IOS image, which when
loaded into memory, can load a second Cisco IOS image into memory and launch it. This variable is used
only for internal development and testing. Use the no form of this command to return to the default setting.
Syntax Description filesystem:
/file-url
Defaults
No helper image is loaded.
Command Modes Global configuration
Command History Release
12.2(25)SEE
Usage Guidelines Filenames and directory names are case sensitive.
This command changes the setting of the BOOTHLPR environment variable. For more information, see
Appendix A, "Cisco Catalyst Blade Switch 3030 Boot Loader Commands."
Related Commands Command
show boot
Cisco Catalyst Blade Switch 3030 Command Reference
2-20
boot boothlpr filesystem:/file-url
no boot boothlpr
Alias for a flash file system. Use flash: for the system board flash device.
The path (directory) and name of a bootable helper image.
Modification
This command was introduced.
Description
Displays the settings of the boot environment variables.
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
78-17262-01