Cisco Catalyst Blade Switch 3030 Cisco Ios Commands - Cisco Catalyst 3030 Command Reference Manual

aaa accounting dot1x
radius
tacacs+
Defaults AAA accounting is disabled.
Command Modes
Global configuration
Command History Release
12.2(25)SEE
Usage Guidelines
This command requires access to a RADIUS server.
We recommend that you enter the dot1x reauthentication interface configuration command before
configuring IEEE 802.1x RADIUS accounting on an interface.
Examples This example shows how to configure IEEE 802.1x accounting:
Switch(config)# aaa new-model
Switch(config)# aaa accounting dot1x default start-stop group radius
The RADIUS authentication server must be properly configured to accept and log update or watchdog
Note
packets from the AAA client.
Related Commands Command
aaa authentication
dot1x
aaa new-model
dot1x reauthentication
dot1x timeout
reauth-period
Cisco Catalyst Blade Switch 3030 Command Reference
2-2
(Optional) Enable RADIUS authorization.
(Optional) Enable TACACS+ accounting.
Modification
This command was introduced.
Description
Specifies one or more AAA methods for use on interfaces running
IEEE 802.1x.
Enables the AAA access control model. For syntax information, see the
Cisco IOS Security Command Reference, Release 12.2 > Authentication,
Authorization, and Accounting > Authentication Commands.
Enables or disables periodic reauthentication.
Sets the number of seconds between re-authentication attempts.
Chapter 2

Cisco Catalyst Blade Switch 3030 Cisco IOS Commands

78-17262-01