Cisco Catalyst 3030 Command Reference Manual page 675

Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands
Usage Guidelines The undebug pm command is the same as the no debug pm command.
Related Commands Command
show debugging
78-17262-01
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Cisco Catalyst Blade Switch 3030 Command Reference
debug pm
B-57