Debug Ip Igmp Filter - Cisco Catalyst 3030 Command Reference Manual

debug ip igmp filter

debug ip igmp filter
Use the debug ip igmp filter privileged EXEC command to enable debugging of Internet Group
Management Protocol (IGMP) filter events. Use the no form of this command to disable debugging.
Syntax Description This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines The undebug ip igmp filter command is the same as the no debug ip igmp filter command.
Related Commands Command
show debugging
Cisco Catalyst Blade Switch 3030 Command Reference
B-14
debug ip igmp filter
no debug ip igmp filter
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands
78-17262-01