Dot1X Max-Reauth-Req - Cisco Catalyst 3030 Command Reference Manual

dot1x max-reauth-req

dot1x max-reauth-req
Use the dot1x max-reauth-req interface configuration command to set the maximum number of times
that the switch restarts the authentication process before a port changes to the unauthorized state. Use
the no form of this command to return to the default setting.
Syntax Description count
Defaults The default is 2 times.
Command Modes
Interface configuration
Command History Release
12.2(25)SEE
Usage Guidelines You should change the default value of this command only to adjust for unusual circumstances such as
unreliable links or specific behavioral problems with certain clients and authentication servers.
Examples This example shows how to set 4 as the number of times that the switch restarts the authentication
process before the port changes to the unauthorized state:
Switch(config-if)# dot1x max-reauth-req 4
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Cisco Catalyst Blade Switch 3030 Command Reference
2-74
dot1x max-reauth-req count
no dot1x max-reauth-req
Number of times that the switch restarts the authentication process before the
port changes to the unauthorized state. The range is 0 to 10.
Modification
This command was introduced.
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
78-17262-01