Cisco Catalyst 3030 Command Reference Manual page 212

mls qos cos
Examples This example shows how to configure the default port CoS to 4 on a port:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos trust cos
Switch(config-if)# mls qos cos 4
This example shows how to assign all the packets entering a port to the default port CoS value of 4
on a port:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos cos 4
Switch(config-if)# mls qos cos override
You can verify your settings by entering the show mls qos interface privileged EXEC command.
Related Commands Command
show mls qos interface
Cisco Catalyst Blade Switch 3030 Command Reference
2-184
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Description
Displays quality of service (QoS) information.
78-17262-01