Cisco Catalyst 3030 Command Reference Manual page 190

mac address-table static drop
Examples This example shows how to enable unicast MAC address filtering and to configure the switch to drop
packets that have a source or destination address of c2f3.220a.12f4. When a packet is received in
VLAN 4 with this MAC address as its source or destination, the packet is dropped:
Switch(config)# mac address-table static c2f3.220a.12f4 vlan 4 drop
This example shows how to disable unicast MAC address filtering:
Switch(config)# no mac address-table static c2f3.220a.12f4 vlan 4
You can verify your setting by entering the show mac address-table static privileged EXEC command.
Related Commands Command
show mac address-table static
Cisco Catalyst Blade Switch 3030 Command Reference
2-162
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Description
Displays only static MAC address table entries.
78-17262-01