Service Information; Symbol Support Center - Symbol PDT 8000 Series Product Reference Manual

PDT 8000 Series Product Reference Guide
• AirBEAM Package Builder Product Reference Guide, p/n 72-55769-xx.
• Windows CE Help File for Symbol Terminals, p/n 72E-38880-xx.
• Symbol Software Developer's Kit (SDK) for the Pocket PC,
available at http://Software.Symbol.com/DevZone.

Service Information

If you have a problem with your equipment, contact the
region. See page xvi
number and several of your bar code symbols at hand.
Call the Support Center from a phone near the scanning equipment so that the service
person can try to talk you through your problem. If the equipment is found to be working
properly and the problem is symbol readability, the Support Center will request samples of
your bar codes for analysis at our plant.
If your problem cannot be solved over the phone, you may need to return your equipment
for servicing. If that is necessary, you will be given specific directions.
Note: Symbol Technologies is not responsible for any damages incurred
during shipment if the approved shipping container is not used.
Shipping the units improperly can possibly void the warranty. If the
original shipping container was not kept, contact Symbol to have
another sent to you.

Symbol Support Center

For service information, warranty information or technical assistance contact or call the
Symbol Support Center in:
1
United States
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, New York 11742-1300
1-800-653-5350
xvi
for contact information. Before calling, have the model number, serial
Symbol Support Center
Canada
Symbol Technologies Canada, Inc.
2540 Matheson Boulevard East
Mississauga, Ontario, Canada L4W 4Z2
905-629-7226
for your