Introduction; Unpacking The Terminal - Symbol PDT 8000 Series Product Reference Manual

Introduction

This chapter explains the physical buttons and controls on your terminal, how to install and
charge the batteries, install the SIM card, insert and remove a compact flash card, insert
and remove the MMC/SD card, replace the S24 wireless network card, replace the
handstrap and start your terminal for the first time.

Unpacking the Terminal

Carefully remove all protective material from around the terminal and save the shipping
container for later storage and shipping.
Verify that you received all equipment listed below:
• a terminal
• a lithium-ion battery
• a handstrap, attached to the terminal
• a stylus
• a Quick Reference Guide for the terminal.
Inspect the equipment for damage. If you are missing any equipment or if you find any
damaged equipment, contact the Symbol Technologies Support Center immediately. See
page xvi for contact information.
Getting Started
1-3