Using The Ubc Battery Adapter - Symbol PDT 8000 Series Product Reference Manual

4. Gently press against the battery to ensure proper contact and lock the battery into
place, as shown below:
The spare battery charging LED on the cradle blinks amber to indicate that the spare
battery is charging and turns solid amber when the battery is completely charged. The
battery fully charges in less than four hours, if the terminal is not in use. See
Indicator on page 1-22 for other indications.

Using the UBC Battery Adapter

1. Insert the appropriate battery adapter into the charger base.
Note: Refer to the UBC 2000 Unversal Battery Charger Product Guide for
additional information regarding the charger base.
Getting Started
Charge LED
1-21