Using Activesync - Symbol PDT 8000 Series Product Reference Manual

PDT 8000 Series Product Reference Guide
6. Use the Port Settings tab to modify the USB port settings of the cradle.
7. Click the OK button.

Using ActiveSync

1. Review the configuration of the cradle using the MobileDox Cradle Manager.
a. A WIN server must be present on your network. Ensure that the WINS Address
provided in the TCP/IP Settings tab matches the IP address of the WIN server
on your network.
b. Ensure that the Use NAT checkbox is not selected in the Port Settings tab.
4-30
Field
Port Name A text string used to describe the
device attached to the port. Any 15-
character string can be entered.
You can specify up to four port
names, one for each of the cradle's
slots.
IP Address The IP address assigned to the
cradled device. There should be one
IP address per cradle slot. This box
will be disabled for all devices if
DHCP is used to obtain the IP
address.
Use DHCP to The cradle will use DHCP to obtain an
obtain IP Address IP address for the handheld.
checkbox
Unchecking this selection allows the
cradle to use Static IP address for the
handheld.
Use NAT The cradle will use Network Address
checkbox Translation (NAT) when forwarding
handheld traffic onto the network. No
IP addresses are necessary for the
handhelds.
This must be disable when using
ActiveSync.
Description