Establish a GSM CSD Connection
To establish a GSM circuit switched data (CSD) connection, you must:
•
Install GSM Demo
•
Verify the functionality of your SIM Card
•
Configure a GSM WAN connection
GSM Demo Installation
Check the terminal to see if the GSMDemo application is installed. Tap Start - Programs -
File Explorer and navigate to the Applications folder. If GSMDemo is not listed, see
Demo Installation
on page C-1 for installation instructions.
Verify the functionality of your SIM Card
1. Ensure that a SIM card is installed in the terminal. See
page 1-24.
2. Ensure that the GSMDemo Application is installed on your terminal. Tap Start -
Programs - File Explorer on your terminal and navigate to the Applications folder.
If GSMDemo is not listed, see
3. If GSMDemo is listed, select GSM Demo.
As GSM Demo launches, it opens the internal serial port to the GSM modem and
attempts to register with a network. The terminal displays the main GSM Demo
screen:
GSM Demo Installation
Figure 10-11. GSM Demo Main Screen
Wireless Wide Area Network Configuration
Installing a SIM Card
on page C-1.
GSM
on
10-21