Options Tab - Symbol PDT 8000 Series Product Reference Manual

• Choose 50%, 25% or 10% to set the transmit power level to that percentage of
the maximum power level.
• Choose Minimum power to set the adapter to the lowest transmission power
level. Use this level when communicating with other devices in very close
proximity, or when little or no radio interference from other devices is expected.
• Check Automatic Power Saving Mode to switch to the Best Network
Performance when the AC power supply is used.
When using the battery, select an appropriate setting between Best Network
Performance and Acceptable Network Performance based on real-time analysis of
the network usage. Automatic Power Saving Mode is the default setting and
extends the operating time before the battery must be recharged.
• Uncheck Automatic Power Saving Mode to select Manual Power Saving
Mode, which allows you to set the slider to a performance level suited to the
intended operation. There are 6 settings ranging from the best network
performance, which uses the most battery power, to acceptable network
performance, which uses the least battery power.
Note: Power savings modes are not available in Enhanced Ad Hoc
operating mode.

Options Tab

Use the Options tab to enable or disable the suspend wireless network option and system
sounds, and set temporary settings.
Figure 9-8. NICTT Properties - Options Tab
Spectrum24 Network Configuration
9-11