Using The Four-Slot Cradles - Symbol PDT 8000 Series Product Reference Manual

The spare battery charging LED on the cradle blinks amber to indicate that the battery is
charging and turns solid amber when battery is completely charged. The battery fully
charges in less than four hours, if the terminal is not in use. See
page 1-22 for other indications.

Using the Four-Slot Cradles

Note: The CRD8000-4000E can only be used with the 128MB RAM
configurations.
1. Connect the cradle to a power source.
2. Slide the latches on both sides of the battery up, to ensure they are in the unlock
position.
3. Insert the battery into the Spare Battery Charging slot on the back of the cradle.
Position it with the charging contacts facing down (over charging pins) and gently
press down on the battery to ensure proper contact.
4. Lock the battery into place by sliding the latches on the battery down.
The spare battery charging LED blinks amber to indicate that the battery is charging and
turns solid amber when battery is completely charged. The battery fully charges in less than
four hours, if the terminal is not in use. See
indications.
UNLOCK
LOCK
Charge LED Indicator
Getting Started
Charge LED Indicator
on page 1-22 for other
on
1-19