Note: Every PDT 8000 terminal should have a unique name. Never try to
synchronize more than one PDT 8000 terminal to the same user
name.
6. If you already created a partnership between your host computer and terminal,
synchronization will occur automatically, immediately following step 4.
Using the USB Cable
Note: A Symbol USB ActiveSync Driver Update must be download in order
to use the USB Cable for communication. This update is available at
http://devzone.symbol.com.
The USB Cable can only be used with the 128MB RAM
configuration.
1. Install ActiveSync on your host computer. See
2. Start ActiveSync on your host computer (Start - Programs - Microsoft ActiveSync).
Click File - Connection Settings and ensure the following selections are made
(select the appropriate COM port for your host PC):
3. Tap Start - ActiveSync - Tools - Options - PC tab on your terminal and ensure USB
is selected from the Enable synchronization when cradled using: drop-down menu
to temporarily disable serial cable detect before using ActiveSync.
Communications
Installing ActiveSync
on page 4-3.
4-13